Product Specification

OConnor camera assistant bag

For comfortable and secure transportation of OConnor fluid heads. Water/dust proof liner with stuff pocket and no internal base seams- provides protection against water from ground and rain and allows the bag lid to be hinged open on set whilst camera equipment is protected.

Hinged Lid- lid stays can be fixed to inner bag liner or D rings (if the liner is zipped up.). Durable clear mesh pockets on lid and inside of front pocket so the user can see inside. Slate pocket/document/call sheet and business card holder with cover. Additional D ring fixing points on front and back of bag to enable carrying of bag sherpa style (with leather strap provided) for heavy loads- so that the weight of the bag is spread over the carrier’s back rather than hanging off the shoulders, provide fixing points for use with additional rucksack straps and provide fixing points for Carabiner hooks.

Quality materials, including internal double skin waterproofing to 1.2M / 4ft column of water, tough wipeable waterproof outer fabric and zips and genuine leather strap and handles. Five heavy-duty dividers with double sided velcro fixings. The dividers are designed to also securely tie down all Oconnor heads and accessories inside the bag. They offer additional elasticated fixing points for pan bars, Arri plates etc. There are two right-angled dividers for fixing additional accessories. Another fixing point on the back of bag for a pouch that helps when using the bag on set. The bag fits into standard Pelicase 1620.

Download Product PDF Sheet

Specification
• Ext. Dims. 22 x 14.5 x 13.5"(57 x 37 x 34 cm)
• Main Int.cavity dims 18 x 12 x 10.5 in(46 x 30 x 27 cm )

  • Ask a question and a expert member of our team will get back to you in a way that suits you.
  • This field is for validation purposes and should be left unchanged.
* Mandatory fields
Steve-T

Steve is OConnor’s Product Manager responsible for all products. He has worked in camera support and accessories engineering for over 12 years. He is a qualified Mechanical Engineer and in his previous roles he has worked on, or conducted the introduction of all the current range of OConnor’s principal products. When he isn’t working, Steve spends time with his young family.


Product Video